Maintenance procedures and precautions for thin-walled bearings

Release time:

2023/01/14

Share:


Do not install it hard on the ball, which will lead to local overload of the ball and contact surface and premature failure of the bearing. Do not use hammer, screwdriver and other hard tools to hit the bearing surface, which will break or embrittle the outer ring of the bearing.
Cleaning of thin-walled bearing and clean environment are very important for bearing. The surface roughness accuracy of the rotating surface and rolling body of the ball bearing ring is about 1/10 m. If the smooth spherical surface is polluted, the impact will be very serious. The lubricating layer between the rolling surfaces is usually 0.2~1 micron, and the granular impurities larger than the lubricant particle size will be excessively crushed by the rolling body, resulting in local compression of the self-aligning roller bearing steel and eventually permanent fatigue of the material. In addition, the size of dust particles in the external environment can reach 10 microns, which will also damage the self-aligning roller bearing. Therefore, a clean and tidy working environment is very important for bearings.
During the process inspection of thin-walled bearing, the working temperature of the bearing is induced by heating. If the temperature exceeds the specified limit, it will automatically alarm to prevent shaft burning. High temperature usually indicates that the bearing is in abnormal condition. High temperature is also harmful to the lubricant of bearing. Sometimes the overheating of the thin-walled deep groove ball bearing can be attributed to the lubricant of the bearing. If the bearing is connected for a long time at a temperature of more than 125, the service life of the bearing will be reduced. The reasons for high bearing temperature include: insufficient bearing lubrication, unqualified impurities in lubricating oil, insufficient bearing internal clearance when the load is too large, causing oil seal friction, etc.
Sealing device
The corresponding sealing devices are installed at both ends of the thin-walled bearing, but many people do not know what role the sealing device plays. Let's see what the sealing device does for thin-walled bearings. Keep the grease inside the bearing from losing during use, and ensure that the bearing is in a lubricating state. Prevent dust or harmful gas outside the bearing from entering the bearing cavity to avoid damage to the bearing.
The sealing structure of thin-walled bearing sealing ring is various, so the sealing effect is also different. If there is a gap between the seal ring and the shaft, it is called non-contact seal. The smaller the clearance, the better the sealing effect, but the smaller the allowable speed of the shaft. On the contrary, on the contrary. If there is no gap between the seal ring and the shaft, it is called contact seal. The larger the contact area of the contact lip of the seal ring, the better the sealing effect, but the smaller the allowable speed of the shaft, the opposite. The main research content of sealing technology is to research and develop corresponding sealing devices suitable for different working conditions, as well as the compatibility of sealing ring material and corresponding lubricating grease.

Related news

2023/01/14

Thin wall bearings are widely used in industrial robots

As one of the important auxiliary equipment components of industrial robots, the bearings of industrial robots mainly include two types of bearings of industrial robots. One is thin-walled bearing, and the other is cross cylindrical roller bearing. There are other planetary reducer bearings, parallel line bearings, bone joint bearings, etc., but the first two bearings are mostly used. With the development of science and technology, the development trend of modern industrial robots is to be light. Install bearings in relatively limited indoor space, if they are small and light. At the same time, the robot has the performance of high load, high rotation accuracy, high operation stability, high precision positioning speed, high repetition accuracy level, long life and high reliability. It is stipulated that the robot bearing of auxiliary facilities must have the performance of high bearing capacity, high precision, high bending rigidity, low friction torque, long life and high reliability. The thin-walled bearing has the high precision, high bearing capacity and low friction torque High bending stiffness and other characteristics just meet the requirements of industrial robot bearings, which are currently widely used in industrial robot bearings.

Click to view details >

2023/01/14

Non-standard bearings: What are the classifications of bearings?

Non-standard bearings: What are the classifications of bearings? Speaking of "bearing", you will be familiar with it. Almost all rotating places will have bearings, such as fans, motors, transport vehicles, etc. So non-standard bearings: What are the classifications of bearings?

Click to view details >

2023/01/14

Influence of Sealing Technology of Thin Wall Bearing on Noise

Thin-walled bearing noise is an important pollution source of the environment and an important indicator that the bearing industry needs to control. Over the past 10 years, China's bearing industry has done a lot of work in reducing bearing noise, greatly improving the level of bearing noise reduction, especially the noise limit of angular contact ball bearings for household appliances, office machinery, instruments and meters is more obvious, but there is still a certain gap compared with foreign countries, The problem highlighted by users is "noise". In other words, the bearing will make irregular sudden noises, even squeals, during its operation. The bearing noise is affected by many and complex factors. It needs to be analyzed and studied from the overall design of the bearing, the bearing components - inner ring, outer ring, cage, rolling element and lubricating oil (grease). Then, let's understand the impact of thin-walled bearing sealing technology on the noise!

Click to view details >

2023/01/14

Introduction of Thin Wall Bearing

In order to obtain low friction torque, high rigidity and good rotation accuracy of the bearing, steel ball with small outer diameter is used. The use of hollow shafts ensures lightweight and wiring space. Thin-walled bearing realizes extremely thin bearing section, and also realizes miniaturization and lightweight of products. The variety of products has expanded its scope of use. The thin-walled 6700 and 6800 series have various types of dust caps, flanges, stainless steel, wide width, etc.

Click to view details >
< 123 >